Brocade Communications Systems ServerIron ADX 12.4.00 User Manual
14
ServerIron ADX Global Server Load Balancing Guide
53-1002437-01
Minimum required configuration
1
Issue show gslb site on the controller to display site communication information. The state displays
“CONNECTION ESTABLISHED” when communication is successful. A protocol version of 1
corresponds to “ATTEMPTING CONNECTION”. Established connections use protocol versions 4 or 5.
“CONNECTION ESTABLISHED” when communication is successful. A protocol version of 1
corresponds to “ATTEMPTING CONNECTION”. Established connections use protocol versions 4 or 5.
SLB-chassis(config)# show gslb site
SITE: brocade
SITE: brocade
Enhanced RTT smoothing: OFF
SI: 1.1.1.1:
SI: 1.1.1.1:
state: ATTEPTING CONNECTION
Protocol Version: 1
Active RTT gathering: NO
Secure Authenticate/Encrypt: NO
To display the default settings, enter the following command (Note the default metric processing
order).
order).
Default metric order: ENABLE
Metric processing order:
1-Server health check
Metric processing order:
1-Server health check
2-Remote SI's session capacity threshold
3-Round trip time between remote SI and client
4-Geographic location
5-Remote SI's available session capacity
6-Least response selection
DNS active-only: DISABLE DNS best-only: DISABLE DNS override: DISABLE
DNS cache-proxy: DISABLE DNS transparent-intercept: DISABLE
DNS cname-detect: DISABLE Modify DNS response TTL: ENABLE
DNS TTL: 10 (sec), DNS check interval: 30 (sec)
Remote SI status update period: 30 (sec)
Remote SI health-status update period: 5 (sec)
Session capacity threshold: 90% Session availability tolerance: 10%
Round trip time tolerance: 10%, round trip time explore percentage: 5%
Round trip time cache prefix: 20, round trip time cache interval: 120 (sec)
Round trip time cache age refresh: DISABLE
Round trip time algorithm selection: USE PASSIVE ONLY
Connection load: DISABLE
Weighted Site Metric: DISABLE Weighted IP Metric: DISABLE
Active Bindings Metric: DISABLE
Syntax: show gslb policy