Brother NC-5100H User Manual

TCP/IP PRINTING 2 - 5

By using Microsoft's IPP software you can also send jobs to other 
printers that do not support the IPP protocol.

If you have already installed the printer driver and wish to configure 
it for network printing, follow these steps:

Select the printer driver you wish to configure.

Select File and then choose Properties.

Click the Ports tab of the driver and click Add Port.

Select the port that you wish to use. Typically this would be 
Standard TCP/IP Port. Then click the New Port... button.

The standard TCP/IP Port Wizard will start. Follow steps 6-10 
of the “Standard TCP/IP Port Printing” section.

If you did not install the TCP/IP protocol during the installation of your 
Windows

®

 NT 4.0 system (either workstation or server) follow these 

steps. If you have already installed the TCP/IP protocol, proceed to 
the next section.

Go to the Start button, choose Settings, and then select 
Control Panel.

Run the Network applet by double clicking the Network icon 
and then click on the Protocols tab.

Select Add, and double click on the TCP/IP Protocol.

Insert the requested disk(s), or CD-ROM, to copy the required files.

Click the Close button. The Windows

®

 NT system will review 

protocol bindings and then you will see the TCP/IP Properties 
dialog.