Bosch Appliances Home Security System D7412G User Manual
D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED
EN | 105
Bosch Security Systems | 1/04 | 47775E
S## Function Code
Enter the function code you want this sked to execute. Sked Function 12 is reserved and is not a valid entry.
The programmer automatically displays the available parameter choices and range fields for this function (such as,
Yes/No is automatically displayed for the areas when choosing the Arm/Disarm function while a blank prompt
exists for the point number you want to bypass when choosing the Bypass Point function).
Yes/No is automatically displayed for the areas when choosing the Arm/Disarm function while a blank prompt
exists for the point number you want to bypass when choosing the Bypass Point function).
After you program the parameter choices associated with the Sked function, press [EXIT GROUP] to continue
programming the sked for date, day of week, time, and holiday.
programming the sked for date, day of week, time, and holiday.
Default:
Blank
Selection:
1 to 11, 13 to 24, 28, 29
S## Area 1[through 8]
1
Arm Area: This function simulates the
Master Arm Delay command center
function. Entries in the
Master Arm Delay command center
function. Entries in the
S## Area #
prompts define the area(s) this sked
arms. The sked can arm multiple areas.
If any point is faulted when the sked
executes, it is force armed regardless of
FA/Bypass max.
arms. The sked can arm multiple areas.
If any point is faulted when the sked
executes, it is force armed regardless of
FA/Bypass max.
Default: No
Selections: Yes or No
Enable the sked to arm the
areas indicated with Yes.
areas indicated with Yes.
Yes
No
Arm Area #.
Do not arm Area
#.
#.
S## Area 1[through 8]
2
Disarm Area: This function emulates
the Disarm_ _ _ command center
function. Entries in the
the Disarm_ _ _ command center
function. Entries in the
S## Area #
prompts define the area(s) this sked
disarms. The sked can disarm multiple
areas.
disarms. The sked can disarm multiple
areas.
Default: No
Selection: Yes or No
Enable the sked to disarm the
areas indicated with Yes.
areas indicated with Yes.
Yes
No
Disarm Area #.
Do not disarm
Area #.
Area #.
S## Point Number
Blank (0)
No point is to be
bypassed
bypassed
3
Bypass a Point: This function emulates
the Bypass Pt? command center
function. The entry in the
the Bypass Pt? command center
function. The entry in the
S## Point
Number
prompt defines the point this
sked bypasses. The point can be
bypassed only if
bypassed only if
Bypassable
is
programmed Yes in the point index
assigned to the point. The bypass is
reported if Bypass Reports are enabled
in the point index assigned to the point.
The sked can bypass one point.
assigned to the point. The bypass is
reported if Bypass Reports are enabled
in the point index assigned to the point.
The sked can bypass one point.
Default: Blank
Selections: Blank, 1 to 127,
129 to 247 for D9412G,
1 to 75 for D7412G
129 to 247 for D9412G,
1 to 75 for D7412G
Enter the number of the point
the sked bypasses.
the sked bypasses.
1 to 127,
129 to 247
129 to 247
Point to bypass
S## Point Number
Blank (0)
No point is to be
unbypassed.
unbypassed.
4
Unbypass a Point: This function
emulates the Unbypass Pt? command
center function. The entry in the
emulates the Unbypass Pt? command
center function. The entry in the
S##
Point Number
prompt defines the
point this sked unbypasses. The sked
can unbypass one point.
can unbypass one point.
Default: Blank
Selections: Blank, 1 to 127,
129 to 247 for D9412G,
1 to 75 for D7412G
129 to 247 for D9412G,
1 to 75 for D7412G
Enter the number of the point
the sked unbypasses.
the sked unbypasses.
1 to 127,
129 to 247
129 to 247
Point to unbypass.