Bosch Appliances Home Security System D7412G User Manual
D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN
EN | 33
Bosch Security Systems | 1/04 | 47775E
0101
0101
0101
0101
0101
Program this item No if it causes false
seizures of the phone line or if you are not
using RAM (this indicates a device using
the same frequency tone is also using the
phone line to which the control panel is
connected).
seizures of the phone line or if you are not
using RAM (this indicates a device using
the same frequency tone is also using the
phone line to which the control panel is
connected).
If RAM Call Back is programmed Yes, the
control panel hangs up the phone after
the RAM tone and a proper RAM
passcode is identified. It then calls the
RAM phone number.
control panel hangs up the phone after
the RAM tone and a proper RAM
passcode is identified. It then calls the
RAM phone number.
Answer Armed
Default:
See
Program Record Sheet
Selection:
1 to 15, or Blank
Blank
No answer.
1 to 15
The control panel answers the phone
after the specified number of rings
when all areas are master armed.
after the specified number of rings
when all areas are master armed.
Set the telephone ring counter to answer when all
areas are master armed. If any area in the control
panel is perimeter armed or disarmed, the Answer
Disarmed ring counter is used.
areas are master armed. If any area in the control
panel is perimeter armed or disarmed, the Answer
Disarmed ring counter is used.
The RAM considers perimeter armed as a
disarmed state.
disarmed state.
Answer Disarmed
Default:
See
Program Record Sheet
Selection:
1 to 15, or Blank
Blank
No answer.
1 to 15
The control panel answers the phone
after the specified number of rings
when any area in the system is in a
perimeter armed or disarmed state.
after the specified number of rings
when any area in the system is in a
perimeter armed or disarmed state.
Set telephone ring counter to answer when any area
is in a perimeter armed or disarmed state.
is in a perimeter armed or disarmed state.
The RAM considers perimeter armed as a
disarmed state.
disarmed state.
Ram Ph
Default:
Blank
Selection:
Up to 24 characters
Blank
Control panel does not dial a phone
number for RAM.
number for RAM.
This is the phone number the control panel dials to
contact RAM. The control panel dials the
programmed number on
contact RAM. The control panel dials the
programmed number on
Phone #5
(
RAM Ph #
)
when the following events occur:
•
Log % Full threshold is achieved.
If Log % Full was programmed with a
value (1 to 99) and a RAM phone number
is programmed, the control panel dials the
RAM phone number when the log
threshold is reached. This function is not
available in RPS. Do not program Log %
Full and RAM phone number at the same
time.
value (1 to 99) and a RAM phone number
is programmed, the control panel dials the
RAM phone number when the log
threshold is reached. This function is not
available in RPS. Do not program Log %
Full and RAM phone number at the same
time.
•
The control panel is contacted by RAM and
RAM Call Back is programmed Yes.
RAM Call Back is programmed Yes.
•
COMMAND 43 is initiated and the user selects
Call RAM option.
Call RAM option.
Enter up to 24 characters to define dialing
characteristics.
characteristics.
See Phone 1 in Section 2.1 Phone.
Remote Program Dialing Exception:
When a RAM phone number is
programmed, the user can call RAM by
pressing [COMMAND][4][3] then [NEXT]
until
When a RAM phone number is
programmed, the user can call RAM by
pressing [COMMAND][4][3] then [NEXT]
until
CONTACT RAM?
displays, then press
[ENTER]. At this point, the user can press
[ENTER] when
[ENTER] when
RAM VIA PHONE?
is
displayed. When performing this function,
only one attempt is made to contact RAM.
only one attempt is made to contact RAM.