Bosch Appliances Security Camera NDN-921 User Manual

FlexiDomeHD 720p IP Camera

Installation | en

Bosch Security Systems

Installation and Operation Manual

AR18-10-B013 | v1.52 | 2011.06

When the camera position is set and all adjustments have been 

made, close the unit.

1.

If necessary, remove the adjustment cap from the lens.

2.

Place the inner liner in position aligning its fin with the 

bracket on the base.

3.

Place the dome onto the base and rotate until it clips into 

place. (If necessary, clean its surface with a soft cloth.)

4.

Place the sealing ring and the trim ring over the dome.

5.

Align the tamper-resistant screws in the trim ring with the 

threaded ends in the mounting base.

6.

Use the supplied special screwdriver bit to tighten the 

three tamper-resistant screws.