Williams Sound PPA T35 User Manual

©2007, Williams Sound Corp.  CAT 099D

3

The PPA T35 transmitter shall be microprocessor controlled with push button configuration.  It shall have an
operating range of up to 1000 feet.  It shall have 10 wideband and 7 non-standard wideband channels operat-
ing on 72.1–75.9 MHz. It shall have 77 narrowband channels operating on 72.025–75.975 MHz.  

The PPA T35 shall have a push button controlled LCD digital display. There shall be three pre-configured (selec-
table) application presets: Hearing Assist, Music and Voice. Configurations for Bandwidth, Frequency, Audio
Input Source (Microphone, Line, Simplex), High Pass Filter, Low Pass Filter, Compressor Slope, Compressor Gain
and RF Output Power shall be push button controlled. The audio level shall be adjustable by push button con-
trol. There shall be a 10 LED array showing +9 to -18 at 3dB intervals. The PPA T35 shall have a 1/4" phone jack
with push button volume control. It shall have push button control for monitoring source audio or transmitted
audio. It shall have an input overload indicator. It shall have an “on” indicator and power button.

The PPA T35 shall be powered by 24 VAC power supply via a 3-pin Molex

®

connector. It shall have a 75 ohm 

F-connector antenna. It shall have an ANT 025 whip antenna on the top panel directly connected to the circuit
board. The transmitter shall have an RCA line output jack. It shall have a combination 1/4" phone/XLR audio
input jack. It shall have an RF “Off” timer that turns off RF signal after 1 hour of no audio activity.

The PPA T35 shall have FCC, RoHS, and WEEE approval and be powered by UL and CSA power supply. It shall
have a 5-year parts and labor warranty. It shall be compatible with Williams Sound FM equipment operating on
72-76 MHz. The transmitter shall be a Williams Sound Corp. model number PPA T35.

*90 days on accessories.