Emerson AV300 Quick Setup Guide

1. Carefully remove the system from the display carton and confirm that you have the following items:

• Main Unit x 1.
• Satellite Speakers x 5.
• Subwoofer x 1.
• Remote Control x 1.
• Satellite Cables x 5.

Save the carton and all packing materials.

2. Install the batteries in the remote control.

3. Place the main unit in the desired location but do not connect the AC power cord at this time.

4. Refer to the following connection diagram.

• Connect all 6 speakers to the color coded terminals on the back of the main unit using the appropriate color coded speaker

cables.

• Connect your TV to the back of the main unit using the supplied video cable (yellow plugs on each end).
• Connect the AM and FM antennas to the back of the main unit.
• Connect the power cords of the main unit and subwoofer to 120V 60 Hz AC household outlets. The STANDBY indicator on

the front of the subwoofer turns red.

• Press the POWER button on the front of the main unit to turn on the main power, then press the STANDBY button on the

remote control to put the system into the Standby mode. The red STANDBY indicator turns 'On'.

Note:
In order to use the remote control to turn the system 'On' and 'Off' the main POWER button on the front panel must be 'On'. We
suggest that this POWER button be left in the 'On' position at all times. If the system will not be used for an extended period -
such as a two week vacation, etc - then you can set the main POWER button back to the 'Off' position.

•  Subwoofer Cable x 1.
•  Remote Batteries x 2.
•  Video Cable x 1.
•  AM and FM Antennas.
•  Owner's Manual.
•  Rubber Feet x 20.

FL

C

FR

SL

SR

  
(4   )

Audio

Inp ut

A C  120V ~60Hz

180

Pha se  

0