Barco CRT Television MSWU-81E User Manual

MSWU-81E  07/08/2013

11

2.General

The internal cooling fan draws cool air from the ventilation inlet into the projector.

The hot air generated inside the projector is dispersed through the ventilation slot. Make sure the ventilation slot is free from 
obstruction. 

Ventilation inlet

Ventilation outlet

The following steps describe briefly how to setup your MSWU-81E projector in a table mount front projection.  Note that each 
step refers to a corresponding  procedure, which is more detailed and illustrated.

1.  Install the batteries of the remote control.  See 

2.  Place the projector on a solid table in front of the screen at the expected throw distance.  Adjust the feet to ensure that 

the projector is installed at right angles (horizontally and vertically) with the screen.  See 

 and

3.  Connect the projector with the local power net. See 

4.  Select and install an appropriate lens, which covers the throw ratio ( = screen size / projector screen distance). See 

5.  Switch ON the projector.  See  

6.  Connect your source to the appropriate input module.  See  

7.  Zoom and shift the lens until the image is properly projected on the screen, Do this by using the “ZOOM” and “FOCUS” 

key on the remote control unit or on the local keypad. If necessary, level the projector from side to side by turning the 
adjustable feet in or out. See 

.