White Rodgers F145RF-1600 Wireless Remote Thermostat Sensor Installation Instruction

At the remote sensor, momentarily press the Connect button 

located on the inside of the sensor. The LED will flash the sensor 
number assigned.

1 amber flash = sensor 1
2 amber flashes = sensor 2
3 amber flashes = sensor 3
4 amber flashes = outdoor sensor 4

1.   At the Comfort Interface, press Menu button once.
2.   Press the Connect button.
3.   Press and release the Next button until the display shows the 

device you want to delete, CTL, RS

 1, RS 2, RS 3 or ORS. 

 

CTL (Equipment Control Module )

 RS 

1 (Indoor remote sensor 1)

 RS 

2 (Indoor remote sensor 2)

 RS 

3 (Indoor remote sensor 3)

 

ORS (Outdoor remote sensor 

4)

 

RAS (Return Air Sensor - do not delete)

4.  Press and hold the 

 and 

 buttons simultaneously to 

delete the device. If additional devices need to be deleted, 
press Next until the display shows the next device to delete. 

5.  Press the Run button to exit the menu.

1.   Press the Menu button once on the Comfort Interface and 

release.

2.   Press the Connect button once and release. Comfort Interface 

display will indicate “Searching” until (CTL) control is found.

3.   Continue pressing and releasing the Next button to view 

the battery icon for all remote sensors (RS

 1, RS 2, RS 3 or 

ORS). If battery needs to be replaced “Change 

” will be 

displayed for the remote sensor listed on the screen. 

Remote Sensor and Equipment Module 
are located too far apart.
Batteries are dead.

Relocate Remote Sensor closer to Equipment 
Control Module.
Replace batteries.

Failed connection to the Control unit

See page 

2, Connecting to 1F98EZ-1621

Sensor

battery

White-Rodgers is a business 
of Emerson Electric Co.

The Emerson logo is a  
trademark and service mark 
of Emerson Electric Co.