Bosch Appliances Video Game Controller d9412gv3 User Manual
D9412GV3/D7412GV3 | Program Entry Guide | 2.0 Panel and Area Wide Parameters
EN | 14
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
2.2 Phone
Parameters
The program items in this category describe panel-
wide characteristics for telephone dialing, receiver
format, and supervision.
wide characteristics for telephone dialing, receiver
format, and supervision.
Phone # Format
Default:
Modem IIIa
2
Selection:
Modem IIIa
2
or Contact ID
Modem IIIa
2
Modem
IIIa
2
Communication Format
Contact ID
ANSI-SIA Contact ID
Central Station Receiver Format for Transmission
of Reports: Modem format provides many reporting
advantages over the Contact ID format. Refer to the
D6500 Report Directory (P/N: 74-04651-001) for
more information about the effect of reporting
formats.
Reports identify points as 001 through 247 and
passcode User ID codes as 000 through 249 at the
D6500 or D6600 Receiver (unless Point/User Flag is
programmed Yes; refer to the Point/User Flag
prompt in this section). When reporting point events,
Modem IIIa
of Reports: Modem format provides many reporting
advantages over the Contact ID format. Refer to the
D6500 Report Directory (P/N: 74-04651-001) for
more information about the effect of reporting
formats.
Reports identify points as 001 through 247 and
passcode User ID codes as 000 through 249 at the
D6500 or D6600 Receiver (unless Point/User Flag is
programmed Yes; refer to the Point/User Flag
prompt in this section). When reporting point events,
Modem IIIa
2
Communication Format also sends point
text to the D6500 or D6600 as programmed in Point
Assignments.
Assignments.
Keypad Programming of Phone # Format
D1255
1. Refer to Figure 1 on page 7 to access Keypad
1. Refer to Figure 1 on page 7 to access Keypad
Programming and navigate to the PHONE
PARAMETERS option.
PARAMETERS option.
2. At the PHONE 1 - 4 prompt, enter the phone
route number you wish to configure and press
[ENT].
[ENT].
3. Press [NEXT] or [PREV] to toggle between
Contact ID and ModemIIIa
2
and press [ENT] to
select the desired phone format.
When the keypad reads PARAMETER SAVED, your
selection has been configured.
selection has been configured.
D1260
1. Refer to Figure 2 on page 8 to access Keypad
1. Refer to Figure 2 on page 8 to access Keypad
Programming and navigate to the Phone
Parameters option and press the corresponding
softkey.
Parameters option and press the corresponding
softkey.
2. At the Phone (1-4) prompt, enter the phone route
number you wish to configure and press
[ENTER]. The current configuration shows.
[ENTER]. The current configuration shows.
3. Press the Edit softkey to change the phone
format.
4. Select the softkey for the option to which you
wish to change. Press the Save softkey
When the keypad reads Parameter Saved, your
selection has been configured.
selection has been configured.
Point/User Flag
Default:
Yes
Selection:
Yes or No
Yes
The control panel sends a flag with
each report telling the D6500 or
D6600 to convert point numbers and
User ID numbers to COMEX format.
Refer to Table 5 and Table 6 for
conversion information. When this
parameter is programmed Yes,
points and User ID numbers are
converted, regardless of the
programming of the D6500 or D6600
Receiver for output to the computer
system. Refer to Appendix C in the
Conettix D6600/D6100
Receiver/Gateway Computer
Interface Manual (P/N: 4998122703).
each report telling the D6500 or
D6600 to convert point numbers and
User ID numbers to COMEX format.
Refer to Table 5 and Table 6 for
conversion information. When this
parameter is programmed Yes,
points and User ID numbers are
converted, regardless of the
programming of the D6500 or D6600
Receiver for output to the computer
system. Refer to Appendix C in the
Conettix D6600/D6100
Receiver/Gateway Computer
Interface Manual (P/N: 4998122703).
No
The control panel does not send the
flag. The D6500 or D6600 outputs
point numbers as 001 to 247 (rather
than 100 to 732) and User ID
numbers as 000 to 249 (rather than
000 to F08), as indicated in Table 5
and Table 6.
flag. The D6500 or D6600 outputs
point numbers as 001 to 247 (rather
than 100 to 732) and User ID
numbers as 000 to 249 (rather than
000 to F08), as indicated in Table 5
and Table 6.
This program item determines how point and User ID
numbers are presented at the D6500 or D6600
display, printer, and computer RS-232 output.
When Phone # Format is Yes, the control panel
sends expanded Bosch Modem IIIa
numbers are presented at the D6500 or D6600
display, printer, and computer RS-232 output.
When Phone # Format is Yes, the control panel
sends expanded Bosch Modem IIIa
2
Communication
Format reports to the D6500 or D6600. If your central
station data files are not set up for point and User ID
number reporting, you can use this program item to
convert these numbers to COMEX Reports.
When Phone # Format is Yes, the control panel
sends expanded Bosch Modem IIIa
station data files are not set up for point and User ID
number reporting, you can use this program item to
convert these numbers to COMEX Reports.
When Phone # Format is Yes, the control panel
sends expanded Bosch Modem IIIa
2
Communication
Format Reports to the receiver. Point/User Flag
affects Bosch Modem IIIa
affects Bosch Modem IIIa
2
Communication Format
data as shown in Table 5. The Bosch Security
Systems, Inc. D6500 or D6600 Receiver adds the
leading zero in the User ID number with Point/User
Flag programmed No.
Systems, Inc. D6500 or D6600 Receiver adds the
leading zero in the User ID number with Point/User
Flag programmed No.