Bosch Appliances Video Game Controller d9412gv3 User Manual
D9412GV3/D7412GV3 | Program Entry Guide | 2.0 Panel and Area Wide Parameters
EN | 45
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
A# Area O/C
Default:
Yes
Selection: Yes or No
Yes
Include the Area # and generate Opening
and Closing Reports for this area when it is
armed.
and Closing Reports for this area when it is
armed.
No
Do not include the Area # or generate
Opening and Closing Reports for this area.
Opening and Closing Reports for this area.
Determines if the area number and the account
number are reported at arming and disarming. As
long as Account O/C is No, the account number
sends a report when arming this area individually. If
Account O/C is Yes, all areas with the same account
number must also be armed.
An Area Opening Report is generated when each
area is opened (disarmed). An Area Closing Report is
generated when each individual area is closed
(armed).
number are reported at arming and disarming. As
long as Account O/C is No, the account number
sends a report when arming this area individually. If
Account O/C is Yes, all areas with the same account
number must also be armed.
An Area Opening Report is generated when each
area is opened (disarmed). An Area Closing Report is
generated when each individual area is closed
(armed).
Do not program this item as Yes if the
control panel reports to an automation
system that cannot interpret multiple Area
Opening and Closing Reports.
control panel reports to an automation
system that cannot interpret multiple Area
Opening and Closing Reports.
A# Disable O/C in Window
Default:
Yes
Selection:
Yes or No
Yes
Do not send Opening and Closing Reports
to the central station if they occur inside an
active window.
to the central station if they occur inside an
active window.
If an Opening or Closing Report occurs
outside a window, send it with an early or
late modifier. Refer to Section 4.1.1
Opening and Closing on page 105.
outside a window, send it with an early or
late modifier. Refer to Section 4.1.1
Opening and Closing on page 105.
The active window must be a Closing
Window for Closing Reports. It must be an
Opening Window for Opening Reports.
Window for Closing Reports. It must be an
Opening Window for Opening Reports.
No
Send Opening and Closing Reports to the
central station even when they occur inside
a programmed window. If an opening or
closing occurs outside of the appropriate
window, it reports but does not have an
early or late modifier.
central station even when they occur inside
a programmed window. If an opening or
closing occurs outside of the appropriate
window, it reports but does not have an
early or late modifier.
If you want to monitor all opening and
closing activity and use features provided
by Opening and Closing Windows, program
this item as No, and program the
appropriate O/C Windows.
closing activity and use features provided
by Opening and Closing Windows, program
this item as No, and program the
appropriate O/C Windows.
Determines if opening and closing activity is reported
when it occurs inside an Opening or Closing Window,
as programmed in O/C Windows.
Reports are always logged and printed on a local
printer, if installed.
when it occurs inside an Opening or Closing Window,
as programmed in O/C Windows.
Reports are always logged and printed on a local
printer, if installed.
A# Auto Close
Default:
No
Selection: Yes or No
Yes
The area automatically master arms at the
end of the Close Window.
end of the Close Window.
When the area is armed automatically, a
Closing Report is sent if the Area or
Account Reports are programmed to do so.
Closing Report is sent if the Area or
Account Reports are programmed to do so.
No
Do not automatically arm the area at the
end of the Close Window.
end of the Close Window.
With this program item, the control panel can
automatically master arm the area at the end of the
Closing Window regardless of the previous armed
state.
automatically master arm the area at the end of the
Closing Window regardless of the previous armed
state.
When an area master arms automatically
at the end of a Close window, the system
disregards the settings in A# Force Arm
Max and P## Bypassable for any faulted
points. The faulted points arm when they
return to normal state.
at the end of a Close window, the system
disregards the settings in A# Force Arm
Max and P## Bypassable for any faulted
points. The faulted points arm when they
return to normal state.
A# Fail to Open
Default:
No
Selection: Yes or No
Yes
Fail to Open Report is sent for this
area if the area was not disarmed
when the Opening Window stop time
occurred.
area if the area was not disarmed
when the Opening Window stop time
occurred.
No
Fail to Open Report is not sent for
this area.
this area.
Use to determine if a Fail to Open Report is sent for
this area. This can determine if a user failed to
disarm the area before the Opening Window expiring.
Normal Opening and Closing Reports do not need to
be programmed to use this feature.
this area. This can determine if a user failed to
disarm the area before the Opening Window expiring.
Normal Opening and Closing Reports do not need to
be programmed to use this feature.