Whirlpool GXI6536DXS Owner's Manual

Page of 28
10
Complete Installation
1. For non-vented (recirculating) installations only, install 
charcoal filters over grille on blower housing. See the “Range 
Hood Care” section.
2. Install metal filters. See the “Range Hood Care” section.
3. Check the operation of the range hood blower and light. See 
the “Range Hood Use” section.
If range hood does not operate, check to see whether a 
circuit breaker has tripped or a household fuse has blown. 
NOTE: To get the most efficient use from your new range hood, 
read the “Range Hood Use” section.
RANGE HOOD USE
The range hood is designed to remove smoke, cooking vapors 
and odors from the cooktop area. For best results, start the hood 
before cooking and allow it to operate several minutes after the 
cooking is complete to clear all smoke and odors from the 
kitchen.
The hood controls are located on the front side of the canopy.
Range Hood Controls
Operating the light
The On/Off light button controls both lights. Press once for On 
and again for Off.
Operating the blower
The Blower Speed buttons turn the blower on and control the 
blower speed and sound level for quiet operation. The speed can 
be changed anytime during fan operation by pressing the desired 
blower speed button.
The Blower Off button turns the blower Off.
A. Duct cover holes
B. Duct cover
C. Control panel
D. Glass canopy
E. Halogen lamps
F. Grease filter
G. Grease filter release handle
A
B
C
D
E
F
E
G
A. On/Off light button
B. Blower Off button
C. Blower speed minimum button
D. Blower speed medium button
E. Blower speed maximum button
A
B
C
D
E