Bosch Appliances Computer Hardware DVA-08K User Manual

en | Subsystem Maintenance

RAID Subsystem DVA-08K | Installation Manual

F.01U.027.797 | V2 | 2008.08

Bosch Security Systems

1.

Remove the failed controller module. 

2.

Install a DIMM module on the new controller module.

3.

Insert the replacement controller. Align the controller module with the module bay at the 

rear of the subsystem. Gently slide the controller module in. 

4.

Fasten the hand screws. Once the controller module has been completely inserted into 

the subsystem chassis, secure the controller module to the chassis by tightening the 

hand screws at the sides of the controller rear panel.

5.

Connect the controller module cables: Reconnect all of the cables that were previously 

disconnected from the controller module. These may include SCSI cables for host and 

expansion connections, an RS-232C (audio jack) cable for serial port connection, and an 

Ethernet cable for network connection.

6.

Power on: Once the new controller module has been properly installed and the cables 

have been correctly connected, turn the subsystem power on.