Bosch Appliances Computer Hardware DVA-08K User Manual

RAID Subsystem DVA-08K | Installation Manual

Subsystem Maintenance | en 53 

Bosch Security Systems

F.01U.027.797 | V2 | 2008.08

7.

Place the SATA hard drive into the drive tray (as shown in Figure 6.10) making sure that 

the hard drive is oriented in such a way that the drive’s SATA connector is facing the back 

of the drive tray.

Installing a SATA Hard Drive

8.

Adjust the drive’s location until the mounting holes in the drive canister are aligned with 

those on the hard drive. Secure the drive with four supplied 6/32 flathead screws. (See 

Figure 6.10)

9.

If the failed drive is a member of a RAID 1, 3, or 5 array, once it is replaced the subsystem 

should immediately start to rebuild the array. The drive activity LEDs should start to flash. 

Only use screws supplied with the drive canisters. Longer screws may damage the drive.