Bosch Slim-Grip SM515 Leaflet

Choose a suitable location for disc (and pedestal) installation.  
Do not place mount in or near an air bag deployment zone 
or where it will obstruct view of the road or hinder vehicle 
operation.

Clean the dashboard or console surface area thoroughly with 
the included alcohol pad.  Allow the area dry before applying 
the mounting disc.  

Remove the paper backing of the disc and place on the 
cleaned surface.  Press the top of the disc down fi rmly to allow 
the adhesive to stick to the surface.  Allow 24 hours for the 
adhesive to cure to the surface before applying any pressure. 

Step 1. 

Step 2. 

Step 3.

Place the suction cup of the pedestal fi rmly down on the center 
of the mounting disc and lower the securing lever. 

Step 4.

Push the pedestal suction cup (A) down onto the disk (C). Flip the 
lever (B) down to secure the suction cup. Adjust the angle of the 
pedestal head as needed.

Step 5.

A

B

C

Safety Precautions
Do not install Arkon products over an air bag cover or within the air 
bag deployment zone.  Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or      
air bag deployment. 

Arkon is not responsible for any damages caused to your car, your 
device, or yourself due to the installation or use of this pedestal mount.

If necessary, adjust the support legs (E) on top and bottom by 
sliding them laterally to avoid any buttons or ports that may be 
on your phone.

Step 1.

Consumer Hotline:
USA     (800) 841-0884
INT’L    (626) 254-9005
Monday - Friday 9 am - 5 pm, PST

Designed in USA | Made in China And Taiwan

© Copyright 2010 Arkon Resources, Inc.

Arcadia, CA 91006 USA

Representative in KOREA

TEL : 02) 839-5701

FAX : 02) 830-5703