Whirlpool GBD277 User Manual

When power is first supplied to the appliance, everything on both 
displays will light up for 5 seconds. Then, the time of day and 
"PF" will appear on the electronic oven display.

Any other time “PF” appears, a power failure occurred. To reset 
the clock, press UPPER OFF or LOWER OFF on double oven 
models. On single oven models, press OFF/CANCEL.

When the oven(s) are in use, this display shows the oven 
temperature. On double oven models, this display will also show 
which oven is being set. The left cavity symbol represents the 
upper oven and the right cavity symbol represents the lower 
oven.

If “Err” appears on the oven display, an invalid pad was pressed. 
Press UPPER OFF or LOWER OFF and retry entry. On single oven 
models, press OFF/CANCEL.

When the ovens are not in use, the display will show the time of 
day.

The START/ENTER pad begins any oven function except the 
Timer. If not pressed within 5 seconds after pressing a pad, 
“START?” will appear on the oven display as a reminder. If not 
pressed within 5 minutes after pressing a pad, the oven display 
will return to the time of day mode and the programmed function 
will be cancelled.

The UPPER OFF, LOWER OFF and OFF/CANCEL pads stop their 
respective oven functions except for the Clock, Timer and 
Control Lock.

The cooling fan may continue to operate even after an oven 
function has been cancelled, depending on the oven 
temperature.

This is a 12 hour clock and does not show a.m. or p.m.

Before setting, make sure the ovens, Timer and Timed Cooking 
are off.

1. Press CLOCK.

2. Press the HR and MIN "up" or "down" arrow pads to set the 

time of day.

3. Press CLOCK or START/ENTER.

To remove the time of day from the display: Press and hold 
CLOCK for 5 seconds.

To return the time of day to the display: Press CLOCK. The 
time should not have to be reset.

Tones are audible signals, indicating the following:

■

Valid pad press

■

Oven is preheated

■

Function has been entered

■

Invalid pad press

■

End-of-cycle

■

Reminder, repeating each minute after the end-of-cycle tones

All of the above tones are preset on, but can be turned off.

To Turn Off/On: Press and hold STOP TIME for 5 seconds, and a 
tone will sound. On double ovens only, “Snd oFF” will appear on 
the oven display for 3 seconds. Repeat to change back to “Snd 
on”.

1. Upper Oven Temperature Display

2. Electronic Display
3. Lower Oven Temperature Display
4. Timer
5. Clock

6. Oven Light
7. Oven Selector
8. Oven Settings
9. Temperature Setting

10. Timed Cooking

11. Hour
12. Minute
13. Start/Enter [Control Lock]
14. Off/Cancel