Weslo WCTL90062 Owner's Manual
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose
of the packing materials until assembly is completed.
of the packing materials until assembly is completed.
Assembly requires two adjustable wrenches
(not included). A phillips screwdriver (not included) may also be needed.
1. Attach six Base Pads (57) to the bottom of the Base (59)
in the indicated locations. Note: One extra Base Pad may
be included.
be included.
2. Firmly hold the Left or Right Handrail (5 or 44) as shown.
Raise the Handrails until the Base (59) and the front
Wheels (56) are resting on the floor.
Wheels (56) are resting on the floor.
3. Make sure that there is a Frame Guide (52) on the left
side of the Frame (23). If there is not, attach the Frame Guide to the left side of the Frame with two Screws
(100) as shown.
(100) as shown.
Make sure that the thick end of the Frame Guide is at the bottom.
4. Next, the treadmill should be raised to the storage position. Hold the treadmill with your hands in the locations
shown at the right.
To decrease the possibility of in-
jury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your
legs rather than your back. Raise the treadmill about
halfway to the vertical position.
you raise the treadmill, make sure to lift with your
legs rather than your back. Raise the treadmill about
halfway to the vertical position.
5
44
59
56
57
57
59
57
4
2
23
100
Thick end
52
1
3