Weider PRO OLYMPIC EXPANSION KIT Owner's Manual
4. Attach the welded bracket on the Frame (F) to the
Olympic Crossbar (I) with two M10 x 81mm Bolts (G)
and two M10 Nylon Locknuts (H).
and two M10 Nylon Locknuts (H).
1. If you own the 831.150760 (WEIDER PRO 900),
follow the steps below to install the olympic
expansion kit.
expansion kit.
Detach the Crossbar (A) from one of the Upright
Bases (B) by removing the four M10 x 81mm Bolts
(C), the Support Plates (D), and the four M10 Nylon
Locknuts (E). Lay the Upright Base on its side to
keep it from falling.
Bases (B) by removing the four M10 x 81mm Bolts
(C), the Support Plates (D), and the four M10 Nylon
Locknuts (E). Lay the Upright Base on its side to
keep it from falling.
3
2. Detach the welded bracket on the Frame (F) from the
Crossbar (A) by removing the two M10 x 81mm Bolts
(G) and the two M10 Nylon Locknuts (H).
(G) and the two M10 Nylon Locknuts (H).
Note: It may be helpful to have a second person
hold the remaining Upright Base (B) to keep it
from falling.
hold the remaining Upright Base (B) to keep it
from falling.
3. Detach the Crossbar (A) from the other Upright Base
(B) by removing the remaining M10 x 81mm Bolts
(C), Support Plates (D) and M10 Nylon Locknuts (E).
(C), Support Plates (D) and M10 Nylon Locknuts (E).
Attach the Olympic Crossbar (I) to the Upright Base
(B) with four M10 x 81mm Bolts (C), two Support
Plates (D), and four M10 Nylon Locknuts (E).
(B) with four M10 x 81mm Bolts (C), two Support
Plates (D), and four M10 Nylon Locknuts (E).
Store the standard Crossbar (A) in a safe place.
E
D
B
C
A
E
C
D
1
A
F
B
G
H
I
F
G
H
2
3
A
E
C
D
D
B
I
C
E
4