Bosch Appliances Security Camera FW5 User Manual

en | Encoder Settings

Camera Browser Interface

AM18-Q0605 | v5.0 | 2011.07

Software manual

Bosch Security Systems

if necessary, use the expert settings to adapt the I-frame quality 

and the P-frame quality to specific requirements. The setting is 

based on the H.264 quantization parameter (QP).

Select the structure you require for the Group of Pictures 

(GOP). Depending on whether you place greater priority on 

having the lowest possible delay (IP frames only) or using as 

little bandwidth possible, you choose IP, IBP or IBBP.

Use the slider to set the distance between I-frames to Auto or 

to between 3 and 60. An entry of 3 means that every third 

image is an I-frame.The lower the number, the more I-frames 

are generated. 

This setting sets the image quality of the I-frames. Select Auto 

to ensure that the maximum bit rate is not exceeded. Auto 

automatically changes the I-frame quality to the settings for the 

P-frame image quality.

This setting adjusts the maximum image quality of the P-frames. 

Auto automatically adjusts to the optimum combination of 

movement and image definition (focus). The value 9 represents 

maximum image quality, a value of 51 represents minimum 

quality. With the slide control, define a control range from a 

chosen value to 51. The encoder delivers the best possible 

quality within this control range while maintaining the 

maximum bit rate.

Click Default to return the profile to the factory default values.