Bosch Appliances Security Camera FW5 User Manual

Camera Browser Interface

Setting up VCA | en

Bosch Security Systems

Software manual

AM18-Q0605 | v5.0 | 2011.07

Two profiles can be set up with different VCA configurations. 

You can save profiles on your computer's hard drive and load 

saved profiles from there. This can be useful if testing a number 

of different configurations. Save a functioning configuration and 

test new settings. Use the saved configuration to restore the 

original settings at any time.

1.

In the VCA configuration drop-down list, select profile 1 or 

2 and enter the required settings.

2.

If necessary, click Default to return all settings to default 

values.

3.

Click the Save... to save the profile settings to another file. 

A new window opens where you specify the file name and 

the location.

4.

Click Load... to load a saved profile. A new window opens 

where you select the location and the profile file.

To rename a profile:

1.

To rename the file, click the icon to the right of the list field 

and enter the new profile name in the field.

2.

Click the icon again. The new profile name is saved.

The current alarm status is displayed for information purposes.

Set an aggregation time of between 0 and 20 seconds. The 

aggregation time always starts when an alarm event occurs. It 

extends the alarm event by the value set. This prevents alarm 

events that occur in quick succession from triggering several 

alarms and successive events in a rapid sequence. No further 

alarm is triggered during the aggregation time.

The post-alarm time set for alarm recordings only starts once 

the aggregation time has expired.