Bosch Appliances Security Camera FW5 User Manual

Camera Browser Interface

Interfaces | en

Bosch Security Systems

Software manual

AM18-Q0605 | v5.0 | 2011.07

The relay can be assigned a name here. The name is shown on 

the button next to Trigger relay. The LIVEPAGE can also be 

configured to display the name next to the relay icon.

Click the button to switch the relay manually (for example, for 

testing purposes or to operate a door opener).

For cameras with a data connector, use this menu to configure 

the data transfer.

Select a controllable unit from the list. If you wish to use the 

serial port to transmit transparent data, select Transparent. 

Select Terminal if you wish to operate the unit from a terminal.

After selecting a unit, the remaining parameters in the window 

are set automatically and should not be changed.

If necessary, enter the ID of the peripheral you wish to control 

(for example a dome camera or pan/tilt head).

Select the value for the transmission rate in bps.

The number of data bits per character cannot be changed.

Select the number of stop bits per character.

Select the type of parity check.

Select the desired protocol for the serial interface.