Brother XR53 User Manual
37
3
e
Unfold the edge of fabric, and position the
fabric with the wrong side facing up.
fabric with the wrong side facing up.
a Wrong side of fabric
b Basting
c Edge of fabric
b Basting
c Edge of fabric
f
Attach blind hem foot “R”.
g
Select a stitch.
h
Remove the flat bed attachment and make
free-arm sewing possible.
free-arm sewing possible.
• For details on free-arm sewing, refer to
“Using a free-arm style” (page 33).
i
Slide the part that you wish to sew onto the
arm, make sure that the fabric feeds correctly,
and then start sewing.
arm, make sure that the fabric feeds correctly,
and then start sewing.
a Arm
j
Position the fabric with the edge of the folded
hem against the guide of the presser foot, and
then lower the presser foot lever.
hem against the guide of the presser foot, and
then lower the presser foot lever.
a Wrong side of fabric
b Fold of hem
c Guide
b Fold of hem
c Guide
k
Adjust the stitch width until the needle
slightly catches the fold of the hem.
slightly catches the fold of the hem.
a Needle drop point
When you change the needle drop point, raise
the needle, and then change the stitch width.
the needle, and then change the stitch width.
a Stitch width
1
1
2
3
1
1
< Seen from the side>
R
R
1
a