Brother XR-9000 Owner's Manual
SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
60
Automatically cutting the
thread
thread
The sewing machine can be set to automatically cut
the threads at the end of the stitching. This is called
"programmed thread-cutting". If programmed thread-
cutting is set, automatic reverse/reinforcement
stitching is also set.
the threads at the end of the stitching. This is called
"programmed thread-cutting". If programmed thread-
cutting is set, automatic reverse/reinforcement
stitching is also set.
a
Turn on the sewing machine.
X
The LCD comes on.
b
Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 49).
c
Press
on the screen.
X
You get
, and the sewing machine is
set for programmed thread-cutting and
automatic reverse/reinforcement stitching.
automatic reverse/reinforcement stitching.
• To turn programmed thread cutting off, press
.
d
Set the fabric in place, and press
(Start/
stop button) once.
a Start/stop button
X
Stitching starts after reverse stitching or
reinforcement stitching.
reinforcement stitching.
e
Once you have reached the end of the
stitching, press
stitching, press
(Reverse/reinforcement
stitch button) once.
If stitching, such as buttonholes and bar
tacking, that includes reinforcement stitching
has been selected, this operation is
unnecessary.
If stitching, such as buttonholes and bar
tacking, that includes reinforcement stitching
has been selected, this operation is
unnecessary.
X
After the reverse stitching or reinforcement
stitching has been done, the sewing machine
stops, and the thread is cut.
stitching has been done, the sewing machine
stops, and the thread is cut.
Memo
z Programmed thread-cutting will not be
performed if
(Start/stop button) is
pressed while sewing. Press
(Reverse/
reinforcement stitch button) at the end of the
stitching.
stitching.
z If the power is turned off, programmed
thread-cutting will be turned off.
1
The thread is cut here.