Wasp Bar Code Wasp WPL305 User Manual
Wound Type
Outside wound.
Width
20mm ~ 112mm (0.78” ~ 4.4”).
Length
10mm ~ 1000mm (0.4” ~ 39”).
25.4mm ~ 1000mm (1” ~ 39”).(for peeler and cutter)
25.4mm ~ 1000mm (1” ~ 39”).(for peeler and cutter)
Thickness
0.06mm ~ 0.19mm. (2.3~7.4 mil), max. 150g/m
2
Roll Diameter
5”.
Roll Core Diameter
25.4mm ~ 76.2mm (1” ~ 3”).
Gap Height
2mm min.
Black Mark Height
2mm min.
Black Mark Width
8mm min.
7.3 Ribbon Specifications
Item
Specification
Type
Wax, Wax / Resin, Resin.
Core Diameter
1".
Width
Max 110mm.
Capacity
300m with 1" core.
Wound Type
Outside wound.
Ribbon End
Clear or silver end tape.
7.4. LED and Button Operation
LEDColor
Description
Green
Orange
Red
The power is on and the device is ready to use.
The system is detecting the paper and ribbon status.
Printing error, such as paper empty, ribbon empty,
cover opened, etc.
The system is detecting the paper and ribbon status.
Printing error, such as paper empty, ribbon empty,
cover opened, etc.
8. Product Support
If you experience any problems with your Wasp printer that you are unable to resolve,
use our online support site to register then call for technical assistance at (214) 547-
4100, Monday through Friday, 8:00 AM – 5:00 PM Central Standard Time. You must
register to be eligible for technical support. Our web site is
If you experience any problems with your Wasp printer that you are unable to resolve,
use our online support site to register then call for technical assistance at (214) 547-
4100, Monday through Friday, 8:00 AM – 5:00 PM Central Standard Time. You must
register to be eligible for technical support. Our web site is
www.waspbarcode.com
You may also contact us in writing at:
Wasp Technologies
1400 10
Wasp Technologies
1400 10
th
Street
Plano, TX 75074
(214) 547-4100
(214) 547-4101 Fax
(214) 547-4100
(214) 547-4101 Fax
9. Warranty Information
Wasp printers are warranted against defects in workmanship and materials for a
period of one year from the date of shipment, provided that the product remains
unmodified and is operated under normal and proper conditions.
Wasp printers are warranted against defects in workmanship and materials for a
period of one year from the date of shipment, provided that the product remains
unmodified and is operated under normal and proper conditions.
Note: Print heads are warranted for 90 days against defect in workmanship. Print
heads will be replaced during the 90 day period once it is determined that the
print head is defective.
heads will be replaced during the 90 day period once it is determined that the
print head is defective.