Woodstock REBEL W2000 User Manual
W2000 Rebel
®
– 7
F
Fiig
gu
urree 4
4.. Attaching the fence.
The Rebel
®
has a two-part, split fence designed for
either straight-line or offset shaping. Assembling the
fence is quite simple and straightforward.
fence is quite simple and straightforward.
S
Stteep
p 1
1 -- Choose one of the fence halves. Select two
fence lock handles and insert the threaded
ends into the
ends into the
1
/
4
'' flat washers and two holes
on the bottom of the fence. Select two T-nuts
and loosely thread onto the ends of the lock
knobs. Line up the T-nuts with the slots in the
router table and slide the fence onto the router
table. F
and loosely thread onto the ends of the lock
knobs. Line up the T-nuts with the slots in the
router table and slide the fence onto the router
table. F
Fiig
gu
urree 4
4.. Roughly lock the fence in
position. Repeat this process for the other
fence half.
fence half.
B
B.. F
Feen
nccee
S
Stteep
p 2
2 -- Attach the wood facings to the fence using the
flat head screws, flat washers and hex nuts
provided. F
provided. F
Fiig
gu
urree 5
5.. Tighten for now; howev-
er, you will notice that there are slots in the
back of the fence for side to side adjustment.
Side to side adjustment of the wood facings is
dependent upon the overall diameter of the
router bit. For maximum safety and support,
adjust the wood facings as close to the router
bit as possible. Check clearance before start-
ing the router.
back of the fence for side to side adjustment.
Side to side adjustment of the wood facings is
dependent upon the overall diameter of the
router bit. For maximum safety and support,
adjust the wood facings as close to the router
bit as possible. Check clearance before start-
ing the router.
F
Fiig
gu
urree 5
5.. Attaching the wood facing.