WHP Wireless WHP-1100 User Manual

Config Window – MAC Access Control Panel 
This feature lets you limit access to the network through the access point. You can 
list up to 1000 stations that are to be granted or denied access. A drop-down box lets 
you select the method of access control: 

•  Disabled: Disable MAC-address access control. This is the default setting. 

•  Accepted List: Only wireless stations whose MAC addresses are on the list 

are allowed to connect through the access point. 

•  Denied List: Wireless stations whose MAC addresses are on the list are 

prevented from connecting through the access point. 

To add a wireless station to the list, click the New MAC Address icon (a sheet of 
paper with one corner folded) on the left side of the MAC Access Control panel. You 
will be prompted to enter: 

•  The wireless station’s MAC address. 

•  A name for the station. 

 

Wireless stations registered in the MAC Address Control Table can be individually 
turned on or off. For example, if you have enabled the Accepted List option, you can 
check the Not Use box for any listed station; the status of this station’s entry will be 

26