Sylvania SRCD-856 User Manual

There are 3 repeat options for your convenience. Pressing the REPEAT button will cycle the 

changer through the three modes as follows:

The CD changer has a 32 track programmable memory that allows you to program up to a total of 

32 tracks on 3 discs for playback in any order you choose. You may also program a specific track to 

be played more than once in a program sequence.

TO PERFORM PROGRAMMED PLAYBACK PROCEED AS FOLLOWS:

1   Open the CD door and insert up to 3 discs in the tray, then close the door.

2   At stop mode Press the PROGRAM button once. The display will show the 01  d1

-- --. This                                                                                                                          

indicates that the memory is ready to accept the first disc and track to be programmed.

3  Select the first disc you wish to program by pressing DISC SKIP. For example, DISC2.the disc 

number will appear on the display as 01  d2

-- --.

4  Select the first track you wish to program by pressing SKIP FORWARD button until the desired 

track appears in the display, EDIT indicator will appear and flash. For example, TRACK7.The 

display will show 01  d2

07.

5 When the display correctly shows the first disc and track number you wish to program, press the 

PROGRAM button again to enter the track number in the memory.Display will now appear as 

02  d2: -- --. This indicates that the memory is ready to accept the second track to be 

programmed. The EDIT indicator stop flashing.

6  Repeat steps 3,4 and 5 until you have entered up to 32 tracks into the memory.

7   When you finish programming press the PLAY/PAUSE button to begin programmed playback.

     The PROGRAM indicator appears in the display and the changer will play back the tracks and

     discs in the order in which you entered them into the in program memory.   

     NOTES:

1st Press

Repeat All Tracks On All Discs In The Tray

2nd Press

Repeat All Tracks On One Disc

3rd Press

Repeat One Track

4th Press

Repeat Mode Off Normal Playback Resumes

During CD playback you may search forward or back within the tracks of the disc to locate a 

specific musical passage if desired. To perform high speed music search press and hold either the 

SKIP FORWARD or SKIP BACK buttons. Release the buttons when you locate the desired 

passage and normal playback will resume at high speed music search.