Sylvania SCD152 User Manual
BEFORE PLAYBACK
Turning on and off
Turning the power on
Turning off the power
Standby mode
Adjusting the sound
Volume
Press PLAY/PAUSE. Power is turned on and
playback starts.
playback starts.
If no new operations are done within
seconds
from the end of last operation, the power is turned
off automatically. (Auto power off function) you can
turn off the power before it is automatically turned
off by pressing STOP
off automatically. (Auto power off function) you can
turn off the power before it is automatically turned
off by pressing STOP
mode until the auto power off function automatically
turns off the power.
To enter standby mode, press PLAY/PAUSE to
start playback, then press STOP
turns off the power.
To enter standby mode, press PLAY/PAUSE to
start playback, then press STOP
Turn the VOLUME control to adjust the volume.
X-BASS
Switch on the X-BASS for extra bass emphasized.
X-BASS
Switch on the X-BASS for extra bass emphasized.
D
D
E
the pivot gently.
Pick up the disc, holding its edge, while pressing
To remove the disc
G
3. Close the disc compartment.
2. Place a disc in the center with the label side facing up.
1. Push the OPEN switch to open the disc compartment
Inserting a disc
F
HOLD switch
When not using the unit, set the HOLD switch to the
ON position, Accidentally pressed button will not
function. If buttons are pressed when the HOLD
switch is set to the
ON position, Accidentally pressed button will not
function. If buttons are pressed when the HOLD
switch is set to the
ON position.
"HOLD"
will light
on
the display.
D
Release the
HOLD
switch
to
OFF
position
before
playback.
When
an
operation
finishes,
the
unit
goes
into
standby
BASS
D
E
F
G
E
30