Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sunfire
  4. TGR401
  5. User Manual

Sunfire TGR401 User Manual

Download
Page of 69
User's Manual
48
CHAPTER 5
Zone 2 Operation
If you have a pair of speakers in a 
second room or area (Zone 2), they 
can play a stereo source independent 
of whatever is playing in the Home 
Theater room (Main Zone). You can 
also play the same source as selected 
in the Main Zone.
The Zone 2 speakers can be pow-
ered by two of the TGR-401's internal 
ampli ers, if you enable "Powered Z2" 
in the Binding Posts menu. The ampli-
 ers that power the surround-back 
speakers are switched to play the 
Zone 2 speakers instead. An external 
power ampli er can be used to power 
the Zone 2 speakers.
Zone 2 plays stereo sources, and is 
unaffected by the DSP, Sonic Hologra-
phy, surround modes or bass man-
agement. 
Audio Connections
The connections for Zone 2 are 
shown on page 23. 
Note: Zone 2 can play analog 
sources independent of what is play-
ing in the Main Zone. It cannot play 
from a digital-only source unless that 
input is selected and playing in the 
Main Zone. To play a source such as 
a DVD player in Zone 2 independent 
of the Main Zone, make sure you 
connect the player's L-R analog audio 
output to the TGR-401.
Video Connections
Zone 2 has a composite video 
output that can connect to a video 
monitor in your other room. This will 
only play if the selected source also 
has composite video. 
Indicators
The front panel has 
a green LED to show 
the Zone 2 status. 
This LED is always on 
when Zone 2 is on. If 
it is off, there will be 
no output to Zone 2.
Turning on Zone 2
With the remote set to operate the 
TGR-401, press the ZONE 2 button. 
The remote's POWER, VOLUME and 
MUTE buttons then work for Zone 2. 
Note: Zone 2 can also be turned 
on and adjusted without using the 
remote. Press the Zone 2 button on 
the TGR-401 front panel followed by 
Power to turn it on (or off), or adjust 
the input source or volume. After 8 
seconds of inactivity, the front panel 
will revert back to control of the Main 
Zone.
Zone 2 operations will work even if 
the Main Zone is off.
SETUP
CHOICES
INPUTS 
SPEAKERS 
VIDEO 
MAIN ZONE 
ZONE 2 
CONTROL 
DIGITAL OUT
DNMX/THRU
DIMMER LOW/MED/HI
MAIN MENU
TRIMS 
TONE CONTROLS 
MODES
PRESETS 
SETUP 
SPEAKERS
AUTO SETUP
SPEAKER SIZE
DISTANCE
LEVEL CALIBRATION
EQ
BINDING POSTS
BINDING POSTS
CHOICES
AMP SECTION
ON
ON, OFF
FRONT
ON
ON, OFF
SURROUND
ON
ON, OFF
CFG POST
OFF
OFF, FRONT, SURR
POWERED Z2
OFF
ON/OFF
ZONE 2
CHOICES
FIXED VOLUME
NONE
NONE, 0.0 - 100.0
PWR UP MAX VOL
100.0
0.0 - 100.0 
PWR UP MIN VOL
0.0
0.0-100.0 MUST BE LESS THAN POWER UP MAX VOLUME
MAX VOLUME
100.0
0.0-100.0 MUST BE MORE THAN POWER UP MAX VOLUME
PWR UP SOURCE
LAST
LAST, INPUT 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
BASS
0
+14 TO -14, 2 DB STEPS
TREBLE
0
+14 TO -14, 2 DB STEPS
BALANCE
0
-20 TO +20, 1 DB STEPS
Zone 2 OSD menu
The ZONE 2 menu allows you to 
customize Zone 2 to suit:
FIXED: Set the Zone 2 volume at this 
 xed level.
PWR UP MAX VOL: Set the Zone 2 
turn-on volume so it will not come 
on higher than this.
PWR UP MIN VOL: Set the Zone 2 
turn-on volume so it will not come 
on lower than this level.
MAX VOLUME: Set the Zone 2 vol-
ume so it cannot be higher than 
this level.
BASS: Adjust the bass with up to 14 
dB of boost or cut.
TREBLE: Adjust the treble with up to 
14 dB of boost or cut.
BALANCE: Adjust the balance with up 
to 20 dB or adjustment either side.
Binding Posts menu
POWERED Z2: Set to ON for the 
Zone 2 binding posts to supply 
speaker-level power to your Zone 
2 speakers