Sony Water Dispenser 2 User Manual
Chap
te
r
1
3
K
e
y
fra
me Ef
fe
c
ts
138
Path Setting
The status area reflects the selected path type.
At this point, depending on the setting for Curve, the effect for Hue and
Xpt is also affected as shown in the following table. In the menu, the Hue
and Xpt settings do not change, but the path type indication is dimmed out.
At this point, depending on the setting for Curve, the effect for Hue and
Xpt is also affected as shown in the following table. In the menu, the Hue
and Xpt settings do not change, but the path type indication is dimmed out.
4
If you selected Spline as the path type, set the following parameters, using
the knobs.
the knobs.
Changing the path type for Hue
Use the following procedure.
1
Press the Hue path type indication for the item that you want to change.
2
Turn knob 1 to change the Hue path type.
The path type indications shown in the menu represent the change in hue
as seen on a Vectorscope.
as seen on a Vectorscope.
CW: Rotate clockwise.
CCW: Rotate counterclockwise.
Short: The hue changes in whichever of the clockwise and
counterclockwise directions is shorter.
Long: The hue changes in whichever of the clockwise and
counterclockwise directions is longer.
Changing the path type for Xpt
1
Press the Xpt path type indication for the item that you want to change.
A path selection window appears.
Curve setting
Hue change
Xpt change
OFF
Does not change
Hold
Step
Changes as with the Step setting
Is not affected
Knob
Parameter
Adjustment
Setting values
1
Tens
Spline interpolation tension
–4.00 to +4.00
2
Bias
Spline interpolation bias
–4.00 to +4.00
3
Cont
Spline interpolation continuity
–4.00 to +4.00