Sony Water Dispenser 2 User Manual
Chap
te
r 14
Sn
aps
aps
ho
ts
ts
160
Snapshot Operations From the Numeric Keypad Control Block
[USER 1] to [USER 8]: These select the USER regions.
[DME 1] to [DME 4]: These select DME channels.
[ALL]: This selects all regions.
[DME 1] to [DME 4]: These select DME channels.
[ALL]: This selects all regions.
Note
The regions that can be selected simultaneously are those assigned to the
region selection buttons in the numeric keypad control block. (See
“Assigning the region selection buttons in the numeric keypad control
block” (page 210).)
region selection buttons in the numeric keypad control block. (See
“Assigning the region selection buttons in the numeric keypad control
block” (page 210).)
The first button pressed lights green as the reference region, and any
subsequently pressed buttons light amber.
subsequently pressed buttons light amber.
For details of the precedence order for becoming the reference region, see
“Regions and Registers” in Chapter 1 (Volume 1).
“Regions and Registers” in Chapter 1 (Volume 1).
The display shows the name of the reference region and the number of the
register previously recalled for that region.
register previously recalled for that region.
4
Press the [STORE] button, turning it on.
5
Enter the desired register number from the numeric keypad.
To find an empty register, instead of entering a number, press the [.]
(period) button. To search for an empty register common to all currently
selectable regions, press the period button again.
(period) button. To search for an empty register common to all currently
selectable regions, press the period button again.
Note
If you choose a register which already contains a snapshot, and save a
snapshot, then the existing register contents are overwritten.
snapshot, then the existing register contents are overwritten.
The register number appears in the display. If the number is followed by a
letter ‘e’ or ‘E’, this indicates the following.
e: The selected register is empty for the regions selected in step
letter ‘e’ or ‘E’, this indicates the following.
e: The selected register is empty for the regions selected in step
3
.
E: The selected register is empty for all currently selectable regions.
The entered register number appears in the display.
The entered register number appears in the display.
6
To apply attributes, press the following buttons, turning them on.
For details of attributes, see “Snapshots” in Chapter 1 (Volume 1).
Attribute to apply
Button
Effect dissolve
[+/
−
/EFF DISS] button
Auto transition
[CLR/AUTO TRANS] button