Sony Water Dispenser 2 User Manual

161

Snapshot Operations From the Numeric Keypad Control Block

  Chapt

er

 1

4

 

Sna

p

s

hot

s

In the numeric keypad control block, it is not possible to apply the cross-
point hold and GPI output attributes. For these, see “Applying snapshot 
attributes” (page 170).

Press the [ENTER] button.

This saves the snapshot, and the [STORE] button goes off. The [RCALL] 
and [STORE STATS] buttons light.

After saving a snapshot, to cancel the save, hold down the [STORE STATS] 
button and press the [UNDO] button.

Use the following procedure.

In the numeric keypad control block, press the [SNAPSHOT] button, 
turning it on.

This allocates the numeric keypad control block to snapshot operations, 
and the [RCALL] button lights.

Press the region selection button corresponding to the region you want to 
recall, turning it on. Multiple selections are also possible.

[M/E 1], [M/E 2], [M/E 3], [P/P]: Select the M/E-1, M/E-2, M/E-3, or 

PGM/PST region respectively.

[USER 1] to [USER 8]: Select a user region.
[DME 1] to [DME 4]: Select a DME channel.
[ALL]: Select all regions together.
[MASTR]: Select a master snapshot.

The regions that can be selected simultaneously are those assigned to the 
region selection buttons in the numeric keypad control block. (See 
“Assigning the region selection buttons in the numeric keypad control 
block” (page 210).)
It is not possible to select [MASTR] and other regions simultaneously. If 
selected simultaneously, the master snapshot takes precedence.

The first pressed button lights green as the reference region, and 
subsequently pressed buttons light amber.