Sony Water Dispenser 2 User Manual

   

Ch
apt

er 15

 

Ut
ilit
y/

S

hot

bo
x

182

Shotbox Register Creation

Press the [STORE] button, turning it on.

The [SNAPSHOT] button lights green.
If not lighted, press the [SNAPSHOT] button to turn it on.

Only in [SHOTBOX] operation mode with the [STORE] button lit, the 
[SNAPSHOT] button or [EFF] button lights green to indicate that a setting 
operation is in progress for the purpose of saving snapshot data or effect 
data in a shotbox register.

Press the region button for the snapshot you want to save, turning it on.

Enter the desired shotbox register number with the numeric keypad 
buttons.

To find an empty register, instead of entering a number, press the[.] 
(period) button.

The display shows the relevant register numbers. When a register number 
is postfixed with an “E,” the register is empty.

Press [ENTER].

This saves the region you turned on in step 

, and the register number you 

recalled for that region as a snapshot setting in a shotbox register, and the 
[STORE] button goes off. At the same time, the [RCALL] button lights.

In the numeric keypad control block, press the [EFF] button, turning it on.

Specify the register number of the keyframe effect you want to save in a 
shotbox register, and then recall it for each region.

Referring to steps 

 to 

, carry out the setting operation for effect register 

saving. In step 

, however, press the [EFF] button, lighting it green.

Enter the shotbox register number specified in step 

 using the numeric 

keypad buttons.

Press the [ENTER] button.

This saves the effect setting in a shotbox register, and the [STORE] button 
goes off. At the same time, the [RCALL] button lights.