Sony Water Dispenser 2 User Manual
Chapt
er
16
Eng
inee
ring
S
e
S
e
tu
p
204
Setup for the Whole System
Note
Format a memory card before using it for the first time.
1
Insert the memory card in the memory card slot.
2
In the System>Maintenance menu, using any of the following methods,
select the USB device.
select the USB device.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Press the arrow keys to scroll the reverse video cursor.
3
In the <USB Storage Device> group, press [Format].
A confirmation message appears.
4
To carry out the formatting, press [OK].
This formats the memory card.
Carrying out the primary setting
To specify a USB device with a storage device connected as a primary device,
use the following procedure.
use the following procedure.
Note
Without this setting, you cannot use the “Memory Card” item in the File menu
to access a memory card on a storage device connected to the USB device.
to access a memory card on a storage device connected to the USB device.
1
In the System>Maintenance menu, using any of the following methods,
select the USB device you want to set as primary.
select the USB device you want to set as primary.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Press the arrow keys to scroll the reverse video cursor.
2
In the <USB Storage Device> group, press [Set Primary].
Reloading a USB driver
To reload a USB driver, in the System>Maintenance menu, press [Reload USB
Driver].
Driver].
Note
If even after this operation the memory card is not recognized, remove the
memory card and reinsert it, then try again.
memory card and reinsert it, then try again.