Sony Water Dispenser 2 User Manual
207
Setup Relating to Operations From the Control Panel
Ch
apt
apt
er 16
E
ngin
eering Se
tup
Linking switcher bus and routing switcher destination
To provide links between the switcher bus and routing switcher destination,
make the following settings as required.
Matrix selection: Select the target of link setting from the eight matrices (1 to
make the following settings as required.
Matrix selection: Select the target of link setting from the eight matrices (1 to
8).
Matrix position definition: Set the start address and level for the source and
destination on the S-Bus.
Link table setting: Link a switcher cross-point button and matrix source.
Link bus setting: Link a switcher bus address and routing switcher
Link bus setting: Link a switcher bus address and routing switcher
destination.
To select a matrix number
Use the following procedure.
1
In the Panel>Config menu, press [External Bus Link].
The External Bus Link menu appears.
The status area shows the current link status.
The status area shows the current link status.
2
Turn the knobs to select the matrix.
In the status area, the color of the selected part changes.
3
Press [Link Matrix Set].
This confirms the matrix selection and the selected part in the status area
returns to the previous color.
returns to the previous color.
To delete a link
With the link selected, press [Clear].
With the link selected, press [Clear].
To define the position of a matrix
Specify where in the 1024 × 1024 S-Bus space the link matrix is to be provided,
by setting the source and destination start address.
For the matrix selected in the External Bus Link menu, use the following
procedure.
by setting the source and destination start address.
For the matrix selected in the External Bus Link menu, use the following
procedure.
1
In the Panel>Config>External Bus Link menu, press [Link Matrix Adjust].
The Link Matrix Adjust menu appears.
Knob
Parameter
Adjustment
Setting values
1
Link No
Link number
1 to 64
2
Link Matrix
Matrix number
1 to 8