Sony Water Dispenser 2 User Manual

  

 Chapt

er

 16

 

Eng

inee

ring
 S
e

tu

p

210

Setup Relating to Operations From the Control Panel

The Key Trans Link menu appears.
The status area shows the keyers for each M/E bank and the linked keyers.

Using any of the following methods, select the keyer to be the master.

• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.

The selected keyer appears in reverse video.

In the <Key Select> group, select the keyer to be linked to the transition of 
the master.

Linking does not apply to a transition carried out with the downstream key 
control block.

In the <Reference Module> group of the Panel>Config menu, select the 
module to be the reference.
• Trackball
• Joy  Stick

Use the following procedure.

In the Panel>Config menu, press [10 Key Region Assign].

The 10 Key Region Assign menu appears. On the left of the status area the 
region selection buttons are shown, and on the right a list of the assignable 
regions.

Press the indication for the button you want to assign.

The button you pressed turns to reverse video.

Using any of the following methods, select the region to be assigned.

• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.

1

Master Key

Select keyer to be master

1 to 16