Sony Water Dispenser 2 User Manual

  

 Chapt

er

 16

 

Eng

inee

ring
 S
e

tu

p

214

Setup Relating to Operations From the Control Panel

Enter any name of not more than 16 characters, then press [Enter].

To set the source name display color, in the <LCD Color> group select the 
color (Orange/Green/Yellow).

In addition to the normal assignment (“main table”), as “cross-point assign 
tables” you can create up to four “sub” tables (Sub1 to Sub4). However, you 
can only carry out assignment of the video and key combinations in the Main 
table.
You can select the table to be used for each of the following banks or buses.
• M/E-1 to M/E-3 banks and PGM/PST bank
• Buses assignable to AUX delegation buttons

Use the following procedure.

In the Panel>Xpt Assign menu, press [Multi Xpt Assign].

The Multi Xpt Assign menu appears.
The status area shows the bank and bus names, and the cross-point assign 
table.

Using any of the following methods, select the bank or bus.

• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.

In the <Xpt Table Select> group, select the cross-point table you want to 
assign.

To set the Sub1 table, use the following procedure.

In the Panel>Xpt Assign>Multi Xpt Assign menu, press [Sub Table 
Assign].

The Sub Table Assign menu appears.
The status area shows a list of the sub table assignments.

1

Bank/Bus

Bank or bus selection

1 to 108