Sony Water Dispenser 2 User Manual
Chapt
er
16
Eng
inee
ring
S
e
S
e
tu
p
230
Setup Relating to Operations From the Control Panel
2
In the <Name Display Mode> group, select the method of display in the
source name displays.
source name displays.
Auto: Optimize display according to number of characters. A name of up
to two characters appears as two characters in one line. A name of up
to four characters appears as four characters in one line.
Otherwise, up to the first eight characters are shown in two lines.
to four characters appears as four characters in one line.
Otherwise, up to the first eight characters are shown in two lines.
2 Character: The first two characters appear.
4 Character: The first four characters appear.
4 Character: The first four characters appear.
Settings for the Flexi Pad
Use the following procedure.
1
In the Panel>Operation menu, press [Flexi Pad Mode].
The Flexi Pad Mode menu appears.
The status area shows a list of the items with their settings.
The status area shows a list of the items with their settings.
2
Make the following settings as required.
Coupling the transition type selection with the Flexi Pad control block
mode selection: To make the Flexi Pad mode selection change
automatically when [WIPE] or [DME] is selected in the transition
control block, press [Wipe/DME Auto Deleg], turning it on.
automatically when [WIPE] or [DME] is selected in the transition
control block, press [Wipe/DME Auto Deleg], turning it on.
Button indications in the memory recall section: When the Flexi Pad
control block mode is [WIPE] or [DME], for the button indications in
the memory recall section, select [Pattern] or [Register Name] in the
<Wipe/DME Display> group. When the mode is [Snapshot] or
[Effect], select [Register No] or [Register Name] in the <Snapshot/
Effect Display> group.
the memory recall section, select [Pattern] or [Register Name] in the
<Wipe/DME Display> group. When the mode is [Snapshot] or
[Effect], select [Register No] or [Register Name] in the <Snapshot/
Effect Display> group.
For details, see Chapter 5 “Wipes” (Volume 1), Chapter 6 “DME Wipes”
(Volume 1), Chapter 13 “Keyframe Effects” (Volume 2) and Chapter 14
“Snapshots” (Volume 2).
(Volume 1), Chapter 13 “Keyframe Effects” (Volume 2) and Chapter 14
“Snapshots” (Volume 2).
Setting the button operation mode
Use the following procedure.
1
In the Panel>Operation menu, press [Custom Button].
The Custom Button menu appears.
The status area shows a list of the items with their settings.
The status area shows a list of the items with their settings.