Sony Water Dispenser 2 User Manual

  

 Chapt

er

 16

 

Eng

inee

ring
 S
e

tu

p

252

Setup Relating to Switcher Processor

Using any of the following methods, select the GPI output port.

• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.

Press [GPI Link Adjust].

The GPI Link Adjust menu appears.
The status area shows the current setting state of the selected link, and a 
list of the selectable video names or button names, together with the GPI 
link Enable/Disable setting for each bus.

Using any of the following methods, select what the setting applies to. For 
each GPI port there can be up to eight links.

• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the selection.

a) These include main pair numbers 1 to 128, and “Cut” and “Auto Trans” on each operating 

bank.

In the <Video/Button> group, press [Select].

The selected video or button name is reflected in the status area.

To clear a video/button name link
Make the selection to which the setting applies, then in the <Video/
Button> group press [Clear].

To select for each bus whether the GPI link setting is enabled or disabled, 
use any of the following methods to select the bus to which the setting 
applies.

• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.

1

GPI Port

GPI output port selection

1 to 8

1

GPI Port

GPI output port selection

1 to 8

2

Link No

Link number selection

1 to 8

3

Video/Button No

Video or button name 
selection

1 to 136 

a)