Sony Water Dispenser 2 User Manual

287

Setup Relating to Router Interface and Tally

  

Ch
apt

er 16 

E

ngin

eering Se

tup

In the <Device> group of the Router/Tally>Parallel Tally menu, select 
DCU1 or DCU2.

Using any of the following methods, select the slot number and port 
number.

• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.

Press [Set].

The Set menu appears.

In the <Source/Destination> group, select the tally type.

Src: Return a tally to all sources output to the destination.
Dest: Return a tally to the destination outputting the source to which a 

source tally is returned.

Set the destination address and level.

The level setting is only required when in step 

 you selected Destination.

When setting the tally type, set the following parameters.

a) When you selected Group1 to 4 in the section “Setting the tally groups” (page 280), this is 

1:R1, 2:G1, 3:R2, 4:G2, 5:R3, 6:G3, 7:R4, and 8:G4.
When you selected Group5 to 8, this is 1:R5, 2:G5, 3:R6, 4:G6, 5:R7, 6:G7, 7:R8, and 
8:G8. (R is an abbreviation of “Red Tally,” and G of “Green Tally.”)

Press [Execute].

This makes the parallel tally settings, in accordance with the settings in 
steps 

 to 

.

1

Slot No

Parallel tally slot number 

2 to 6

2

Port No

Parallel tally port number

1 to 54

1

Address

Destination address

1 to 1024

2

Level

Destination level

1 to 8

3

Type

Tally type

1 to 8

 a)