Sony Water Dispenser 2 User Manual
33
DME Special Effect Operations
Cha
p
te
r 11
DME Op
er
at
ion
s
s
4
To set the color of the sepia image, press [Sepia Color], turning it on, and
adjust the parameters.
adjust the parameters.
Mono Settings
This effect converts the image into a monochrome image.
Applying the Mono effect
Use the following procedure.
1
In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2
Press [Mono], turning it on.
The Mono effect is enabled. The color image changes to monochrome.
Posterization and Solarization Settings
The Posterization and Solarization effects both give a painting-like effect by
coarsening the gradations of the image. The Posterization effect coarsens
luminance gradations, and the Solarization effect coarsens chroma gradations.
coarsening the gradations of the image. The Posterization effect coarsens
luminance gradations, and the Solarization effect coarsens chroma gradations.
Applying the Posterization or Solarization effect
Use the following procedure.
1
In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2
Press [Poster/Solar], turning it on.
The Posterization and Solarization effects are enabled. You can adjust the
coarseness of the gradations with the knobs.
coarseness of the gradations with the knobs.
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00