Sony Water Dispenser 2 User Manual
47
DME Special Effect Operations
Cha
p
te
r 11
DME Op
er
at
ion
s
s
a) Set when Lock is on.
b) Set when Lock is off.
b) Set when Lock is off.
• When Shape mode is selected
a) Set when Lock is on.
b) Set when Lock is off.
c) 1 (Circle): Circle
b) Set when Lock is off.
c) 1 (Circle): Circle
2 (Rectangle): Rectangle
3 (Star): Star
4 (Heart): Heart
3 (Star): Star
4 (Heart): Heart
To limit the direction in which modulation is applied
By pressing [Plus Only], turning it on, you can limit the direction in which
modulation is applied (the direction in which the image expands) to the plus
direction only.
modulation is applied (the direction in which the image expands) to the plus
direction only.
To set the ripple center point
Use the following procedure.
1
Press [Position], turning it on.
2
Set the following parameters, depending on the selected modulation mode.
• When Shape is selected
8
Offset A
a)
Direction along periphery in
which to offset ripple phase and
amount of movement
which to offset ripple phase and
amount of movement
−
8.000 to +8.000
9
Speed A
b)
Ripple direction along periphery
and speed
and speed
−
100.00 to +100.00
Knob
Parameter
Adjustment
Setting values
Knob
Parameter
Adjustment
Setting values
1
Amp R
Ripple amplitude
0.00 to 100.00
2
Freq R
Ripple frequency
0.00 to 100.00
3
Offset R
a)
Direction in which to offset ripple
phase and amount of movement
phase and amount of movement
−
8.000 to +8.000
4
Speed R
b)
Ripple direction and speed
−
100.00 to +100.00
5
Shape
Ripple shape
1 to 4
c)
6
Aspect
Ripple aspect ratio
−
100.00 to +100.00
7
Angle
Ripple angle
−
8.000 to +8.000
Knob
Parameter
Adjustment
Setting values
1
H
Ripple center point in
horizontal direction
horizontal direction
−
5.000 to +5.000