Sony Water Dispenser 2 User Manual
65
DME Special Effect Operations
Cha
p
te
r 11
DME Op
er
at
ion
s
s
2
Press [Lighting], turning it on.
The Lighting effect is enabled.
3
In the <Light Pattern> group, select the lighting pattern Plane, Bar or
Preset.
Preset.
You can adjust the intensity of the light and other parameters with the
knobs.
knobs.
4
Set the parameters.
The parameters differ as follows, depending on the selected lighting
pattern.
pattern.
• When Plane is selected
• When Bar is selected
• When Preset is selected
a) Setting is available when nonlinear effect page turn, roll, cylinder, or sphere is selected.
The three regions for which the light intensity can be set
Knob
Parameter
Adjustment
Setting values
1
Light
Intensity of light in highlight area 0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Light
Intensity of light in highlight area 0.00 to 100.00
2
Ambient
Intensity of light in ambient area
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Light
Intensity of light in highlight area 0.00 to 100.00
2
Ambient
Intensity of light in ambient area
0.00 to 100.00
3
Shade
Intensity of light in shade area
0.00 to 100.00
a)
Highlight area
Ambient area
Shade area