Sony Water Dispenser 2 User Manual
71
DME Special Effect Operations
Cha
p
te
r 11
DME Op
er
at
ion
s
s
4
In the <Decay Mix Mode> group, select the way in which the video signal
is blurred.
is blurred.
Soft: mix the live image with the afterimage.
Hard: show the lighter of the live image and afterimage.
Hard: show the lighter of the live image and afterimage.
5
To erase the afterimage, press [Decay Eraser], turning it on.
To erase the afterimage from memory each time a keyframe is
passed
passed
Press [Decay Eraser], turning it on.
When the effect passes a keyframe, the afterimage is erased before writing a
new afterimage.
When the effect passes a keyframe, the afterimage is erased before writing a
new afterimage.
Selecting the freeze timing
In the <Decay Freeze Timing> group, select the timing for motion decay
freezing.
freezing.
Frame: freeze in frame units.
Field: freeze in field units.
Field: freeze in field units.
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
1
Press the [DUST] button, turning it on.
2
Set the following parameters.
a) The way in which the afterimage disappears is affected by both the Video Decay and
Decay Dust parameter adjustments for the motion decay.
Keyframe Strobe Settings
Each time a keyframe is passed, the video image is frozen, and left remaining.
Knob
Parameter
Adjustment
Setting values
1
Decay Dust
Amount of the afterimage
disappearing as stardust
a)
0.00 to 100.00
2
Dust Soft
Timing with which stardust
disappears
disappears
0.00 to 100.00
3
Dust Size
Size of stardust
0.00 to 100.00
4
Dust Aspect
Aspect ratio of stardust
–100.00 to +100.00