Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. Water Dispenser 2
  5. User Manual

Sony Water Dispenser 2 User Manual

Download
Page of 362
   
Ch
apt
er 11
 
DME
 O
per
at
io
ns
72
DME Special Effect Operations
Note
When you turn on keyframe strobe, if the trail or motion decay effect is on, it 
automatically goes off.
Leaving a trail of afterimages of the image
Use the following procedure.
1
In the DME menu, select VF5 ‘Light/Trail’ and HF4 ‘KF Strobe.’
The KF Strobe menu appears.
2
Press [KF Strobe], turning it on.
This enables the keyframe strobe effect, and you can now use the knobs to 
adjust the parameters.
3
Set the following parameter.
a) At the setting 0.00, there is no afterimage. At a setting of 100.00, the afterimage does not 
decay.
4
To erase the afterimage, press [KF Strobe Eraser], turning it on.
Selecting the overlay priority for movie and still images (video 
freeze image)
In the <Priority> group, select the way in which the images are overlaid.
Over: the movie is on top, and the still image is underneath.
Under: the movie is underneath, and the still image is on top.
Mix: the movie and still images are mixed; adjust the following parameter with 
the knob.
a) The 0.00 setting is the same as Over, and the 100.00 is the same as Under.
Selecting the freeze timing
In the <KF Freeze Timing> group, select the timing for freezing the keyframe 
strobe.
Knob
Parameter
Adjustment
Setting values
1
Decay
Degree of blurring of the video 
signal
0.00 to 100.00 
a)
Knob
Parameter
Adjustment
Setting values
1
Mix
Mix amount of the still image with 
respect to the movie
0.00 to 100.00 
a)