Sony Water Dispenser 2 User Manual
Ch
apt
apt
er 11
DME
O
per
at
io
ns
84
Global Effect Operations
Shadow Settings
This effect uses two successive channels to give an image a shadow.
For an illustration, see “Global Effects” in Chapter 1 (Volume 1).
Applying the Drop Shadow effect
Use the following procedure.
1
In the Global Effect>Ch1 - Ch4 menu, select HF3 ‘Shadow.’
The Shadow menu appears.
Depending on the selected channels, the valid channel block buttons differ
in the <Ch1>, <Ch2>, and <Ch3> blocks.
Depending on the selected channels, the valid channel block buttons differ
in the <Ch1>, <Ch2>, and <Ch3> blocks.
The explanation of this procedure uses the example of <Ch1> block.
2
Press [Ch1 Shadow], turning it on.
The drop shadow effect is enabled, and channel 2 becomes the channel for
the shadow to the image. You can adjust the position and density of the
shadow with the knobs.
the shadow to the image. You can adjust the position and density of the
shadow with the knobs.
3
Set the parameters.
4
In the <Ch1 Shadow Source> group, select the shadow source signal.
Video: Select Ch2 video input as the shadow.
Flat Color: Select a matte color as the shadow.
Flat Color: Select a matte color as the shadow.
5
When you select Flat Color in step
4
, adjust the parameters.
Knob
Parameter Adjustment
Setting
values
1
Position H
Horizontal shadow position
−
8.00 to +8.00
2
Position V
Vertical shadow position
−
8.00 to +8.00
3
Density
Density of shadow
0.00 to 100.00
Knob
Parameter Adjustment
Setting
values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00