Sony Water Dispenser 2 User Manual
89
Control of P-BUS Devices
Ch
apt
apt
er 12
E
x
te
rn
a
l De
v
v
ic
e
s
Setting the action for a rewind operation
On the P-BUS timeline, when the [REWIND] button in the keyframe control
block is pressed the action set for the first keyframe is not executed; when the
[RUN] button is pressed, then the first keyframe action is executed.
To execute an action when the [REWIND] button is pressed, it is necessary to
set this action (Rewind Action). To carry out this setting, in the Device>P-Bus
Timeline menu, press [Rewind Action] to recall the Rewind Action menu. In
this setting screen, use the same setting method as in the screen for setting an
action on the P-BUS timeline.
block is pressed the action set for the first keyframe is not executed; when the
[RUN] button is pressed, then the first keyframe action is executed.
To execute an action when the [REWIND] button is pressed, it is necessary to
set this action (Rewind Action). To carry out this setting, in the Device>P-Bus
Timeline menu, press [Rewind Action] to recall the Rewind Action menu. In
this setting screen, use the same setting method as in the screen for setting an
action on the P-BUS timeline.
Alternatively, you can select the reverse arrangement, whereby when the
[REWIND] button is pressed, this executes the action set for the first keyframe,
and when the [RUN] button is pressed the first keyframe action is not executed.
In this case, the Rewind Action setting is still valid.
[REWIND] button is pressed, this executes the action set for the first keyframe,
and when the [RUN] button is pressed the first keyframe action is not executed.
In this case, the Rewind Action setting is still valid.
For details of the setting, see “Setting the first keyframe when a rewind is
executed” (page 229).
executed” (page 229).
Carrying out a Direct Store
You can carry out a Learn with the register number specified for the device
selected in the menu. Use the following procedure.
selected in the menu. Use the following procedure.
1
Using any of the following methods, select the device.
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
2
In the Device>P-Bus Timeline menu, press [Direct Store].
The numeric keypad window appears.
3
Enter the register number for which you want to carry out the Learn.
The setting range is from 1 to 99.
The setting range is from 1 to 99.
4
Press [Enter].
This carries out a Learn with the specified register number.
Knob
Parameter
Setting
Setting values
1
ID
Device ID
0 to 23