Sony Water Dispenser 2 User Manual
99
Control of VTRs and Disk Recorders
Ch
apt
apt
er 12
E
x
te
rn
a
l De
v
v
ic
e
s
The [RCALL] button in the numeric keypad control block lights.
2
With the region selection buttons in the numeric keypad control block,
select the region.
You can also select more than one button.
select the region.
You can also select more than one button.
3
Enter the number of the register to be recalled with the numeric keypad
buttons.
buttons.
4
Press the [REWIND] button in the keyframe control block.
The VTR/disk recorder automatically advances to the timecode value set
as the start point.
While the VTR/disk recorder is operating, the [ALL STOP] button in the
device control block flashes amber, and when the start point is reached
lights green.
If the operating VTR/disk recorder is selected as the reference region in the
device control block, the [CUE] button also flashes and lights in the same
way as the [ALL STOP] button. Also, when the start point is reached, the
[STOP] button lights amber.
as the start point.
While the VTR/disk recorder is operating, the [ALL STOP] button in the
device control block flashes amber, and when the start point is reached
lights green.
If the operating VTR/disk recorder is selected as the reference region in the
device control block, the [CUE] button also flashes and lights in the same
way as the [ALL STOP] button. Also, when the start point is reached, the
[STOP] button lights amber.
5
Press the [RUN] button in the keyframe control block.
The VTR/disk recorder is now controlled according to the keyframe data.
Setting the start point, stop point, and start delay time in a menu
In the Device menu, you can set the start point, stop point, and start delay time.
To make the setting, use the following procedure.
To make the setting, use the following procedure.
1
In the Device menu, press VF3 ‘VTR’ and HF1 ‘Cueup & Play.’
The Device>DDR/VTR>Cueup & Play menu appears.
The status area shows the device name, register number, status
information, current time, start point, stop point, and start delay time.
The status area shows the device name, register number, status
information, current time, start point, stop point, and start delay time.
2
Using any of the following methods, select the device.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
3
Carry out any of the following operations as required.
• To set the start point, press [SET] in the <Start TC> group.
Knob
Parameter
Adjustment
Setting values
1
Dev
Device number
1 to 12