Sony Water Dispenser 2 User Manual
147
Creating and Saving a Master Timeline
Ch
apt
apt
er 13
K
e
y
fr
a
me
E
ffe
c
ts
4
Press the buttons for the regions you want to save on the master timeline
(here, [M/E-1] and [M/E-2]), turning them on.
(here, [M/E-1] and [M/E-2]), turning them on.
5
Press the region selection button [MASTR], turning it on.
The display shows the register number last used for master timeline
operation.
operation.
6
Press the [STORE] button, turning it on.
7
With the numeric keypad buttons, enter the number of the register (here
“1”) in which you want to save the master timeline, and press the [ENTER]
button.
“1”) in which you want to save the master timeline, and press the [ENTER]
button.
This saves M/E-1 register 10 and M/E-2 register 5 in master timeline
register 1, and the [STORE] button goes off. At the same time, the
[RCALL] button lights.
register 1, and the [STORE] button goes off. At the same time, the
[RCALL] button lights.
Checking the regions saved on a master timeline
For example in the course of amending a master timeline, you can check which
regions are saved in the register. With the [MASTR] button in the numeric
keypad control block lit, hold down the [STORE] button. While it is held down,
the buttons for the saved regions light. When the button is released, the state
before it was held down is restored.
regions are saved in the register. With the [MASTR] button in the numeric
keypad control block lit, hold down the [STORE] button. While it is held down,
the buttons for the saved regions light. When the button is released, the state
before it was held down is restored.
Creating and Saving a Master Timeline With the Menu
You can save a master timeline using the Effect>Master Timeline>Store menu.
Recalling the Store menu
Carry out the following procedure.
1
Do either of the following.
• In the menu control block, press the top menu selection button [EFF].
• In the numeric keypad control block, press the [EFF] button twice in
• In the numeric keypad control block, press the [EFF] button twice in
rapid succession.
The Effect menu appears.
2
Press VF1 ‘Master Timeline’ and HF1 ‘Store.’
The Master Timeline>Store menu appears.