Sony KV-27FA210 User Manual

In order to use your remote control with other equipment, you need to program your remote 
control. Use the following procedure to program the remote control.

Check the list of “Manufacturer’s Codes” on page 6 and find the three-digit code number 
for the manufacturer of your component. If more than one code number is listed, use the 
number listed first.

Press . 

Press 

 or 

 button to indicate the type of component you want to program with 

the remote control.

Use the 

 buttons to enter the three-digit manufacturer’s code number.

Press .

To check if the code number works, aim the TV’s remote control at the component and 
press on the green POWER button (VCR/DVD, SAT/CABLE, TV) that corresponds with 
that component. If it responds, you are done. If not try using another code listed for that 
manufacturer.

✍

The 

 and 

 button will flash when you press 

.

✍

You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3. 

✍

If you have problems programming your remote control, see “Troubleshooting” on page 41.